Table of Contents
Advertisement
4. Remote control error messages
In case of error during operation, the following messages appear on the remote
control display:
Symbol
When the internal projector's temperature is over 75℃, the "E1" error
E1
appears on the temperature display of the internal projector, and all
operations of the product stop.
When the external projector's temperature is over 70℃, the "E2" error
appears on the temperature display of the external projector, and all
E2
operations of the product stop.
If the motor is overloaded, and certain abnormal current is detected,
E
the "E" error appears on the automatic mode display, and all
operations of the product stop.
If normal communication between the remote control and the main
C
body is impossible, the "C" error appears on the automatic mode
display, and all operations of the product stop.
It appears when the limit switch is faulty and all operations of the
LE
product stop.
After checking the error messages, contact the Customer Support Center.
Caution
Meaning
35
Hide quick links:
Advertisement
Table of Contents
