Automatic Mode (Mode A) - CeraGem CGM MCB-1201 User Manual

3. How to use the product (by mode)

Automatic Mode (Mode A)

1 2
(Mode Duration : Approx. 36 minutes 30 seconds)
1. Turn on the remote control power and check the display.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
2. Select the mode by pressing the automatic mode button
(Mode A).
3. The mode begins automatically, and body sensing
starts.
Lie in the correct posture.
- When you move the internal projector, the moving projector display appears.
- During body recognition, internal projector position symbols will flash in order.
- The mode display will show "A"
- To change the mode, press the desired mode button
once more in 5-second standby state after pressing the
mode button.
21