Table of Contents
Advertisement
3. How to use the product (by mode)
Manual Mode
2
1
26
(Mode Duration: Approx. 60 minutes)
1. Turn on the remote control power and check the display.
- External projectors appear only when they are connected.
- The current temperature is displayed, and the standby state is shown.
2. Press the manual mode button and move the internal
projectors to the desired position.
- If you press the manual mode button, the manual mode
- To change the mode, press the desired mode button; the
3. Thermal stimulation begins from the designated
position. Assume a proper body posture.
- When you move the internal projector, the moving projector display appears.
- The projector moves after a certain time (5 minutes) to prevent freeze burn.
display will flash, and a buzzer sound will be emitted.
mode will then be changed immediately.
Hide quick links:
Advertisement
Table of Contents
