Adjusting Temperature - CeraGem CGM MB-1101 User Manual

2. How to use the remote control

Adjusting Temperature

Depending on the mode in use, the temperature of the internal projector, external projector,
main heating element, and the auxiliary heating element can be adjusted.
22
1. Check the current temperature.
2. Press the temperature key and set the temperature to the
desired level using the Up/down key.
- Pressing the temperature set key causes the temperature set point to flash.
Internal
Projector Projector
OFF, 30℃~65℃
3. Check the changed temperature set point on the remote
control display.
- When the temperature setting is completed, the temperature is converted into
the current level after a few seconds.
External Main Heating
Element
OFF, 30℃~60℃
Auxiliary Heating
Element