Appendix A
Configuring and calibrating your
SMART Board E70 interactive flat
panel with Windows
If your SMART Board E70 interactive flat panel has an inaccurate touch or the touch is not working,
you may need to configure or calibrate it. Follow the instructions below to configure and calibrate
your SMART Board E70 interactive flat panel.
IMPORTANT
The SMART Board E70 interactive flat panel is factory calibrated. We recommend that you
resolve touch inaccuracy through configuration prior to calibration.
Configuring your touch and display settings for
the SMART Board E70
If touch is inaccurate:
See the list below for supported resolutions for your SMART Board E70 interactive flat panel:
l
1920 × 1080 *
1600 × 1200
1280 × 1024
1360 × 768
1280 × 960
The resolutions marked with an asterisk (*) are recommended.
NOTE
There should be no black bar bars on the top bottom or on either side of the image, the
image should completely fill the screen.
23
smarttech.com/kb/170534
1280 × 768
1280 × 720 *
1024 × 768
800 × 600
640 × 480