Playing Back Music With Airplay - Yamaha R-N402 Owner's Manual

The AirPlay function allows you to play back iPhone/
iPad/iPod touch/iTunes music on the unit via network.
PC
iTunes
Router
iPhone/iPad/
iPod touch
Notes
• This section describes all the "iPhone", "iPad" and "iPod
touch" as the "iPod".
• To use this function, the unit and your PC or iPod must be
connected to the same router (p. 12). You can check whether the
network parameters (such as the IP address) are properly
assigned to the unit in "Information" (p. 37) in the "SETUP"
menu.
AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion or later, and PC
with iTunes 10.2.2 or later.
(as of June 2016)
Playback of iPod/iTunes music
contents
Follow the procedure below to play back iPod/iTunes
music contents on the unit.
1
Turn on the unit, and start iTunes on the PC
or display the playback screen on the iPod.
If the iPod/iTunes recognizes the unit, the AirPlay
icon ( ) appears.
y
For iPods using iOS 7/iOS 8/iOS 9, AirPlay icon is displayed in
Control Center. To access Control Center, swipe up from the
bottom of the screen.
iTunes (example)
Note
If the icon does not appear, check whether the unit and PC/iPod
are connected to the router properly.

Playing back music with AirPlay

This unit
Playback starts
iOS 7/iOS 8/iOS 9 (example)
2
On the iPod/iTunes, click (tap) the AirPlay
icon and select the unit (network name of the
unit) as the audio output device.
iTunes (example)
Network name of the unit
3
Select a song and start playback.
The unit automatically selects "AirPlay" as the input
source and starts playback. The playback information is
displayed on the front display.
y
• If you press the DISPLAY repeatedly, you can switch the
playback information on the front display (p. 20).
• You can turn on the unit automatically when starting playback
on iTunes or iPod by setting "Standby (Network Standby)"
(p. 38) in the "SETUP" menu to "On".
• You can edit the network name (the unit's name on the network)
displayed on iPod/iTunes in "Network Name" (p. 38) in the
"SETUP" menu.
• You can adjust the unit's volume from the iPod/iTunes during
playback.
CAUTION
When you use iPod/iTunes controls to adjust volume, the
volume may be unexpectedly loud. This could result in
damage to the unit or speakers. If the volume suddenly
increases during playback, stop playback on the iPod/
iTunes immediately.
Use the following remote control keys to control
playback.
Keys
p/ e
s
b / w
Playback
keys
f / a
REPEAT
SHUFFLE
iPod (example)
Functions
Stops/resumes playback.
Stops playback.
Skips forward/backward.
Changes the Repeat settings.
Changes the Shuffle settings.
31
En