Connecting A Mobile Device To The Unit Directly (Wireless Direct) - Yamaha R-N402 Owner's Manual

Connecting to a network
Connecting a mobile device to the
unit directly (Wireless Direct)
Using Wireless Direct, this unit can operate as a wireless
network access point that mobile devices can directly
connect to.
MEMORY
Cursor keys
ENTER
HOME
SETUP
SETUP
NOW PLAYING
Note
When the unit is connected to the network with Wireless Direct, it
cannot connect to any other wireless router (access point). To
play back contents from the Internet, connect this unit to a
network with a wired router or wireless router (access point).
1
Press SETUP.
2
Use the cursor keys ( / ) to select
"Network" and press ENTER.
y
To return to the previous state, press RETURN.
3
Use the cursor keys ( / ) to select
"Connection" and press ENTER.
4
Use the cursor keys ( / ) to select
"W.Direct" and press ENTER.
W.DIRECT
¡SSID
5
Press ENTER to display the SSID for this
unit, and press RETURN to previous state.
6
Use the cursor keys ( / ) to select
"Security" and press ENTER.
W.DIRECT
¡WPA2-PSK(AES)
18
En
PRESET
ENTER ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
7
Use the cursor keys ( / ) to select desired
security method and press RETURN.
Settings
None, WPA2-PSK (AES)
Note
If you select "None", the connection may be insecure since the
communication is not encrypted.
8
Use the cursor keys ( / ) to select
"Security Key" and press ENTER.
KEY
9
Use the cursor keys to enter the security key
on this unit, and press RETURN to previous
state.
Enter either 8 to 63 character string or 64
hexadecimal digits.
Use the cursor keys (/) to select a character and
the cursor keys (/) to move the edit position.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
10
Use the cursor keys ( / ) to select
"Connect [ENT]" and press ENTER to save
the setting.
The SSID and security key information is required
for setup of a mobile device.
When you select the "SSID" in Step 5, you can
display the SSID configured for this unit. This SSID
can be changed by using cursor keys.
11
Configure the Wi-Fi settings of a mobile
device.
For details on settings of your mobile device, refer to
the instruction manual of the mobile device.
(1) Enable the Wi-Fi function on the mobile device.
(2) Select the SSID of this unit from the list of
available access points.
(3) When you are prompted for a password, enter the
security key displayed in Step 9.
If "ERROR" appears, check the security key on this
unit and repeat Step 11.
If "ERROR" does not appear, the connection was
successful. Verify whether the unit is connected to a
wireless network (p. 19).
12
To exit from the menu, press SETUP.