T+A PA 2000 R User Manual page 57



Loudspeaker and signal
cables
Mains cables and mains
filters
Changing the batteries:
We recommend the use of the  'POWER THREE' ready-to-use mains cable
and the 'POWER BAR' mains distribution panel which is fitted with a phase
indicator as standard.
When you have completed the wiring of the system switch the system on.
Switch on the loudspeaker outlet to which your speakers are connected and
switch the integrated amplifier to the listening source which you wish to hear.
You should now hear the music.
If you encounter problems when setting up and using the integrated amplifier for
the first time please remember that the cause is often simple, and equally
simple to eliminate. Please refer to the section of these instructions entitled
'Trouble shooting'.
Loudspeaker cables and signal cables (inter-connects) have a significant
influence on the overall reproduction quality of your sound system, and their
importance should not be under-estimated. For this reason  recommends
the use of high-quality cables and connectors.
Our accessory range includes a series of excellent cables and connectors
whose properties are carefully matched to our speakers and electronic units,
and which harmonise outstandingly well with them.
For difficult and cramped situations the  range also includes special-length
cables and special-purpose connectors (e. g. right-angled versions) which can
be used to solve almost any problem concerning connections and system
location.
The mains power supply provides the energy which your sound system
equipment needs, but it also tends to carry interference from remote devices
such as radio and computer systems.
Our accessory range includes the mains cable 'POWER THREE' with
integrated shell-type filters and the 'POWER BAR' mains filter distribution board
which prevent electro-magnetic interference from entering your Hi-Fi system.
The reproduction quality of our systems can often be further improved by using
these items.
If you have any questions regarding cabling please refer to your specialist 
dealer who will gladly give you comprehensive expert advice without obligation.
We would also be happy to send you our comprehensive information pack on
this subject.
Locate the point indicated by the arrow in the left picture, and open the battery
compartment by pressing it in and simultaneously sliding back the battery cover.
Insert three batteries of the LR 03 (MICRO) type in the battery compartment, as
shown in the engraved diagram. Please note: it is essential to replace all three
batteries at the same time.

Caution!
Batteries shout not be exposed to excessive heat like sunshine, fire or the like.

Disposing of exhausted batteries:
Exhausted batteries must never be thrown into the household waste! They
should be returned to the battery vendor (specialist dealer) or your local toxic
waste collection point, so that they can be recycled or disposed in a proper way.
Most local authorities provide collection centres for such waste, and some
provide pick-up vehicles for old batteries.
57