LAN
R2
LINK
Mains input
Interface for diagnosis work and computer-controlled operation of device
functions. (Home-Automations-Systems e. g. CRESTRON, AMX).
Control output for devices with R2
One of the two sockets can be used as a trigger input. An adapter lead is
required for this; please refer to the accessory range.
(see chapter 'Surround operation with the PA 2000 R')
Pin assignment
1
Reserved
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
GND (ground)
7
Reserved
Trigger (+5...+20V)
8
This socket is for mains connection.
For correct connection refer to the sections 'Installation and Wiring' and
'Safety Notes'.
inputs.
LINK
RJ 45 connector
55