Allen-Bradley PowerFlex 700S Quick Start Manual page 21

Table E Recommended Control Wire
Type Wire Type(s)
Digital I/O Un-shielded Per US NEC or applicable
national or local code
Shielded Multi-conductor shielded cable
such as Belden 8770(or equiv.)
Standard Belden 8760/9460(or equiv.)
Analog I/O
Remote Pot Belden 8770(or equiv.)
Encoder/ Combined: Belden 9730 (or equivalent)
Pulse I/O
Less 30.5 m
(100 ft.)
Encoder/
Signal: Belden 9730/9728 (or
Pulse I/O
equivalent)
30.5 m (100
Power: Belden 8790
ft.) to 152.4
Combined: Belden 9892
m (500 ft.)
Encoder/
Signal: Belden 9730/9728 (or
Pulse I/O
equivalent)
152.4 m
Power: Belden 8790
(500 ft.) to
Combined: Belden 9773/9774 (or
259.1 m
(850 ft.) equivalent)
EMC Refer to EMC Instructions — CE Conformity on page Quick Start-5
Compliance
(1) Belden 9730 is 3 individually shielded pairs (2 channel plus power). If 3 channel is required, use Belden 9728
(or equivalent).
(2) Belden 8790 is 1 shielded pair.
(3) Belden 9892 is 3 individually shielded pairs (3 channel), 0.33 mm
AWG) for power.
(4) Belden 9773 is 3 individually shielded pairs (2 channel plus power). If 3 channel is required, use Belden 9774
(or equivalent).
(5) If the wires are short and contained within a cabinet which has no sensitive circuits, the use of shielded wire
may not be necessary, but is always recommended.
Description
–
2
0.750 mm
conductor, shielded.
2
0.750 mm
twisted pair, 100% shield
(5)
with drain
2
0.750 mm
cond., shielded
(1) 2
0.196 mm
individually shielded.
2
0.196 mm
(1)
individually shielded.
(2) 2
0.750 mm
(3) 2
0.330 mm
(3)
2
0.196 mm
(1)
individually shielded.
(2) 2
0.750 mm
2
0.750 mm
(4)
individually shielded pair.
2
(22 AWG) plus 1 shielded pair 0.5 mm
21
Insulation
Rating
o
300V, 60 C
o
(140 F),
(18AWG), 3
Minimum
(18AWG),
.
(18AWG), 3
(24AWG),
300V,
(24AWG),
º
75-90 C
º
(167-194 F)
(18AWG)
2
or 0.500 mm
(24AWG),
(18AWG)
(18AWG),
for details.
2
(20