Power Connection & Controls - Gamma 7900 Els Owner's Manual

POWER CONNECTION & CONTROLS
D
Instructions for Power Connection and Controls
CAUTION ! Before connecting to the power supply, check the voltage source that the
machine is being connected to. The acceptable range of input voltages for this ma-
chine is between 100 V and 240 V @ 50 to 60 Hz. If you have any questions regarding
the input voltage supply for your area, please ask your electric utility company.
To install the power cord, insert the female end of the power cord into the AC Adapter and
then insert the female end of the cord from the AC Adapter into the A/C Power Cord Socket
"E" located under the back panel of the tensioner. Plug the male end of the power cord into
a grounded power outlet. When using extension cords, use grounded heavy duty extension
cords rated for 15 AMP service.
To connect the Foot Pedal Switch, insert the male pin at the end of the Foot Pedal Switch
cord into the Foot Pedal Switch Receptacle "F" located under the back panel of the Ten-
sioner.
Switch on the machine by pressing the On-Off Power Switch on the back panel. At start-up,
the machine will perform a self diagnostics check.
WARNING! FOR INDOOR USE ONLY.
NEVER OPEN UNIT WITH POWER CONNECTED.
CHILDREN SHOULD NEVER BE PERMITTED TO OPERATE THIS
MACHINE WITHOUT ADULT SUPERVISION.
A
B
C
E F
Front Panel Features
A - String Gripper
B - Tension Lever Switch
C - Control Panel with LED Display
Back Panel Features
D - Power Switch
E - A/C Power Cord Socket
F - Foot Pedal Switch Receptacle
11