Tensioner Controls - Gamma Progression ES II Owner's Manual

A
F
A

TENSIONER CONTROLS

B
C
6 . 0 2
E
D
B
USE ONLY WITH 250V FUSE
C
D
Front Panel Features
A - String Gripper
B - Tension Switch
C - L.E.D. Tension Display
D - Tension Adjustment Knob
E - Cover Plate
F - Gripper Reversing Switch
Rear Panel Features
A - Lighted Power Switch
To turn the power on, press the left
switch.
B - 5 Amp Fuse Holder (w/ spare fuse)
C - A/C Power Cord Socket
Insert the female end of the power cord
socket.
D - 110V / 220V Select Switch
Setting Tension
The Progression ES II stringing machine utilizes a rotary
adjusting knob along with a digital L.E.D. display to indicate the
set tension. To set the tension, rotate the adjustment knob
clockwise to decrease the displayed tension, counter-clock-
wise to increase the displayed tension, until the desired tension
is displayed on the digital display. Aramid fiber and Metallic
strings will generally string up tighter on the Progression ES II
machine compared to synthetic or natural gut strings. There-
fore, when stringing with Aramid (Kevlar, Technora) hybrid
strings or metallic strings, we recommend setting tension 4-5
lbs. lower than you would normally use for synthetic or natural
gut strings.
6
side of the
into the