Tensioner Controls - Gamma PROGRESSION 600ES-LED Owner's Manual

A
G
F
A
Setting Tension
The Progression 600ES stringing machine utilizes a rotary adjusting knob along with a digital
L.E.D. display to indicate the set tension. To set the tension, rotate the adjustment knob
clockwise to decrease the displayed tension, counter-clockwise to increase the displayed
tension, until the desired tension is displayed on the digital display. Aramid fiber and Metallic
strings will generally string up tighter on the Progression Es machine compared to synthetic
or natural gut strings. Therefore, when stringing with Aramid (Kevlar, Technora) hybrid strings
or metallic strings, we recommend setting tension 4-5 lbs. lower than you would normally use
for synthetic or natural gut strings.

TENSIONER CONTROLS

B
C
8 8 . 8
D
E
B
C
D
Front Panel Features
A - String Gripper
B - Indicator lights
C - Tension Switch
D - L.E.D. Tension Display
E - Tension Adjustment Knob
F - Cover Plate
G - Gripper Reversing Switch
Rear Panel Features
A - Lighted Power Switch
To turn the power on, press the top half
of the switch.
B - 5 Amp Fuse Holder (w/ spare fuse)
C - A/C Power Cord Socket
Insert the female end of the power cord
into the socket.
D - 110V / 220V Select Switch
6