To Select "Dc Volts - Keysight 33210A Service Manual

2
Chapter 2 Quick Start

To Select "DC Volts"

To Select "DC Volts"
You can select the "DC Volts" feature from the "Utility" menu, and then
set a constant dc voltage as an "Offset" value. Let's set "DC Volts" = 1.0
Vdc.
1 Press and then select the DC On softkey.
The Offset value becomes selected.
2 Enter the desired voltage level as an "Offset".
Enter 1.0 Vdc with the numeric keypad or knob.
You can enter any dc voltage from -5 Vdc to +5 Vdc.
26