Assembly - Weslo pursuit 360R WLEX1476.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
wrenches , and pliers
Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled.
M4 Washer
(70)–2
M6 Locknut
(63)–4
M6 x 15mm Button
Screw (46)–4
M10 x 60mm Button Screw (33)–2
.
M6 Washer M6 Curved
(68)–8 Washer (69)–4
M8 Locknut
(10)–2
M6 x 30mm Button
Bolt (64)–4
M8 x 125mm Bolt (62)–2
M8 Split
Washer (42)–3
M4 x 5mm
M10 Locknut
Self-tapping
(65)–2
Screw (66)–2
M6 x 35mm Button
Screw (61)–8
M10 x 75mm Carriage Bolt (30)–2
5
, two adjustable
M8 Washer
(54)–4
M4 x 8mm
Screw (29)–2
M8 x 20mm Button
Screw (34)–3