Assembly - Weslo Vibration G 5.8 User Manual

ASSEMBLY

Place all parts of the vibration platform in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed.
1. Lift the Handlebar Frame (28) and the Front
Post (26) to the position shown.
Attach the Handlebar Frame (28) to the Bottom
Frame (18) with the two M8 Knobs (27).
Then, insert the Control (43) into the Control
Holder (32).
2. Attach the Left Handlebar (36) to the Handlebar
Frame (28) with two M8 x 16mm Screws (6)
and two M8 Arc Washers (31).
Attach the Right Handlebar (37) to the
Handlebar Frame (28) in the same way.
All manuals and user guides at all-guides.com
5
1
43
27
27
2
36
31
6
31
32
26
28
18
37
28