Table of Contents
Advertisement
ASSEMBLY
Assembly requires two people. Place all parts of the EASY STRIDE in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Read through all steps before beginning assembly. As you assemble the EASY STRIDE, make sure that all
parts are oriented as shown in the drawings. Tighten all parts as you assemble them, unless instructed to do
otherwise. Refer to the drawings below to identify the small hardware used in assembly. Note: If a part is not
found in the parts bag, check to see if it has been pre-attached.
Assembly requires two adjustable wrenches
, a hammer
, and a phillips
screwdriver
(not included). A small amount of soapy water is also required.
1/2Ó Spacer (39)Ñ2
3/8Ó Spacer (20)Ñ4
Link Arm Bushing (14)Ñ4
3/8Ó Nylon Locknut (37)Ñ10
Lock Washer (16)Ñ1
3/8Ó Washer (19)Ñ2
#8 x 3/4Ó Screw (28)Ñ5
3/8Ó x 1 1/4Ó Screw (18)Ñ2
3/8Ó x 2Ó Carriage Bolt (35)Ñ4
3/8Ó x 2 1/4Ó Carriage Bolt (36)Ñ4
4
Advertisement
Table of Contents
