Assembly - Weslo momentum G 3.2 User Manual

ASSEMBLY

• To hire an authorized service technician to
assemble the hybrid trainer, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish assembly.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• To identify small parts, see page 6.
1. Go to www.wesloservice.com/registration on
your computer and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Care (see the front cover of this
manual) and register your product.
2. Identify the Rear Stabilizer (28), which has a
Leveling Cap (33) on each end.
While a second person lifts the rear of the Frame
(1), attach the Rear Stabilizer (28) to the Frame
with two M8 x 65mm Bolts (100); start both
Bolts, and then tighten them.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
one pair of pliers
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
33
28
100
7
1
33