Table of Contents
Advertisement
ASSEMBLY
•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
•• To identify small parts, see page 5
1. Identify the Front Stabilizer (16), which is shorter
than the Rear Stabilizer (not shown).
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (16) to the
Frame with two M10 x 70mm Screws (44).
2. Attach the Rear Stabilizer (15) to the Seat Frame
(2) with two M10 x 65mm Bolts (28) and two M10
Locknuts (45).
•• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.
1
2
15
28
6
16
1
2
45
44
Advertisement
Table of Contents
