Table of Contents
Advertisement
BURNERS
The burners can be removed and washed
with soapy water only.
They will remain perfect if always
cleaned with products used for silver-
ware.
After cleaning, check that the burner-
caps and burner-heads are dry before
placing them in the respective hous-
ings.
C
F
Fig. 8.1
18
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
8.1 - 8.2) - failure to do so can cause
serious problems.
Check that the electrode S (figs. 8.1,
8.3) is always clean to ensure trouble-
free sparking.
Check that the probe T (figs. 8.1, 8.3)
next to each burner is always clean to
ensure correct operation of the safety
valves.
Both the probe and ignition plug must
be very carefully cleaned.
Note:
The electrode S must be very
carefully cleaned. To avoid damage
to the electric ignition do not use it
when the burners are not in place.
T
S
Fig. 8.2
Hide quick links:
Advertisement
Table of Contents
