Introduction; Chipset; Display Memory; Dvi-I - Advantech POC-S197 User Manual

3.1

Introduction

The POC-S197/S177/S157 has an onboard display interface. The specifications and
features are described as follows:
3.1.1

Chipset

The POC-S197/S177/S157 uses a mobile Intel GS45 Express chipset for its graphic
controller. It supports HDMI and CRT monitors. The Mobile Intel GS45 Express
chipset are designed for use with Intel® Core
Intel® Celeron® mobile processors based on the 45-nm process.
3.1.2

Display Memory

Intel® Dynamic Video Memory Technology (Intel® DVMT 5.0)
3.1.3

DVI-I

The POC-S197/S177/S157 has signal channel DVI-I ports. The device accepts one
channel of RGB data over three pairs of serial data ports. The POC-S177 is able to
drive a DVI display at a pixel rate of up to 165 MHz, supporting WUXGA (1920 x
1200) resolution display.
3.1.4

Display Types

POC-S197/S177/S157 supports a single DVI-I jack for single monitor. The DVI-I jack
supports both a DVI Digital I/F and a CRT RGB signal. The analog CRT DAC inter-
face supports a max DAC frequency up to 400 MHz, 24-bit RAMDAC, is DDC2B
compliant, and resolutions up to QXGA 2048 x 1536.
3.2

Installation of Chipset Driver

Complete the following steps to install the Chipset driver. Follow the procedures in
the flow chart that apply to the operating system that you are using within your POC-
S197/S177/S157.
Note! The following Windows illustrations are examples only. You must follow
the flow chart instructions and pay attention to the instructions which
appear on your screen.
Note! The CD-ROM drive is designated as "D" throughout this chapter.
Note! <Enter> means pressing the "Enter" key on the keyboard.
Note! Before you install the graphics driver of POC-S197/S177/S157, please
ensure you have installed the "Intel Chipset Software Installation Utility".
You can find this driver in the Utility CD-ROM.
POC-S197/S177/S157 User Manual
TM
2 Duo, Intel® Core
16
TM
2 Solo and