Wireless Setup - Simrad GO XSE Installation Manual

Ú Note:
CZone Config also needs to have the GO XSE set as a
controller.
Import and backup a configuration file
The files page may be used to import CZone configuration files, or
export a copy to a memory card in the card reader. Importing
overwrites the existing file on the GO XSE and all connected CZone
devices.
For further information, see "Backing up and Importing user data" on page
63.
Upgrading module firmware
The Files page also allows the loading of NMEA 2000 devices
firmware upgrades. For example, CZone firmware updates. For more
information, refer to "NMEA 2000 device upgrades" on page 64.

Wireless setup

The unit includes built-in wireless functionality that lets you:
• Use a wireless device to remotely view (smartphone and tablet)
and control the system (tablet only). Wireless devices use the
GoFree app downloaded from their relevant application store.
• Access the GoFree Shop.
• Upload your logs to create custom maps at Insight Genesis.
• Download software updates
• Connect to third party applications
Connecting a tablet
Install the GoFree App on the tablet before following this
procedure.
1.
Navigate to the wireless network connection page on the tablet,
and find the unit or GoFree wireless xxxx network. If more than
one is in range, review the Wireless devices page on the unit
to confirm which wireless device is connected to the unit.
2. Select a device on the Wireless devices page to show its
network key.
3.
Enter the eight character (or longer) Network Key in the tablet to
connect to the network.
4.
Open the GoFree application - the unit should be automatically
detected. The name displayed will be either the default, or that
Software Setup | GO XSE Installation Manual
57