Displaying And Maintaining Ipv6 Dns; Ipv6 Dns Configuration Examples; Static Domain Name Resolution Configuration Example - HP A5120 EI Series Configuration Manual

To do...
Specify a DNS server
Configure a DNS suffix
NOTE:

The dns resolve and dns domain commands are the same as those of IPv4 DNS.

You can configure up to six DNS servers, including those with IPv4 addresses.

You can specify up to ten DNS suffixes.

Displaying and maintaining IPv6 DNS

To do...
Display the static IPv6 domain
name resolution table
Display IPv6 DNS server
information
Display DNS suffixes
Display the information of
dynamic IPv6 domain name
cache
Clear the information of dynamic
IPv6 domain name cache

IPv6 DNS configuration examples

Static domain name resolution configuration example

Network requirements
As shown in
rather than an IPv6 address. Configure static domain name resolution on the device so that the device
can use the domain name host.com to access the host whose IPv6 address is 1::2.
Use the command...
dns server ipv6 ipv6-address [
interface-type interface-number ]
dns domain domain-name
Use the command...
display ipv6 host [ | { begin | exclude |
include } regular-expression ]
display dns ipv6 server [ dynamic ] [ | { begin
| exclude | include } regular-expression ]
display dns domain [ dynamic ] [ | { begin |
exclude | include } regular-expression ]
display dns host ipv6 [ | { begin | exclude |
include } regular-expression ]
reset dns host ipv6
Figure 42, the device wants to access the host by using an easy-to-remember domain name
Remarks
Required
Not specified by default.
If the IPv6 address of a DNS server is
a link-local address, you need to
specify the interface-type and
interface-number arguments.
Required
Not configured by default. Only the
provided domain name is resolved.
91
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user
view