HP A5120 EI Series Configuration Manual page 148

ReasmOKs:
InFragDrops:
InFragTimeouts:
OutFragFails:
InUnknownProtos:
InDelivers:
OutRequests:
OutForwDatagrams:
InNoRoutes:
InTooBigErrors:
OutFragOKs:
OutFragCreates:
InMcastPkts:
InMcastNotMembers:
OutMcastPkts:
InAddrErrors:
InDiscards:
OutDiscards:
# Ping Switch A and Switch B on Host, and ping Switch A and Host on Switch B to verify that they are
connected.
CAUTION:
When you ping a link-local address, you should use the -i parameter to specify an interface for the
link-local address.
[SwitchB] ping ipv6 -c 1 3001::1
PING 3001::1 : 56
Reply from 3001::1
bytes=56 Sequence=1 hop limit=64
--- 3001::1 ping statistics ---
1 packet(s) transmitted
1 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/2 ms
[SwitchB-Vlan-interface2] ping ipv6 -c 1 2001::15B:E0EA:3524:E791
PING 2001::15B:E0EA:3524:E791 : 56
Reply from 2001::15B:E0EA:3524:E791
bytes=56 Sequence=1 hop limit=63
--- 2001::15B:E0EA:3524:E791 ping statistics ---
1 packet(s) transmitted
1 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
As shown in the output information, Switch B can ping Switch A and Host.
0
0
0
0
0
117
83
0
0
0
0
0
28
0
7
0
0
0
data bytes, press CTRL_C to break
time = 2 ms
data bytes, press CTRL_C to break
time = 3 ms
140