HP A5120 EI Series Configuration Manual page 116

After enabling IRDP on Host A and Host B, display the routing table for the hosts (Host A for example).
[HostA@localhost ~]$ netstat -rne
Kernel IP routing table
Destination Gateway
10.154.5.0 0.0.0.0
192.168.1.0 0.0.0.0
192.168.2.0 0.0.0.0
0.0.0.0 10.154.5.1
The output shows that the default route on Host A points to IP address 10.154.5.1, and Host A has routes
to 192.168.1.0/24 and 192.168.2.0/24.
Genmask Flags Metric Ref
255.255.255.0 U
255.255.255.0 U
255.255.255.0 U
0.0.0.0 UG
108
Use Iface
0 0 0 eth1
0 0 0 eth1
0 0 0 eth1
0 0 0 eth1