HyperTerminal
DCS 500 / DCS 600 Service Manual
The correct setting can be checked and set to the required settings
(e.g. COMx connector) in the menu item:
FILE/PROPERTIES/CONFIGURE
The properties for COM1 are shown below
•
Switch on auxiliary supply voltage of SDCS-POW-1
•
The LED-display on the SDCS-CON-x shows a small u
•
The terminal program detects communication
Active communication is shown by the *
3ADW000093R0701_DCS500B/DCS600_Service manual_e_g
Chapter 10 - Service
VI A
10 - 19