Bct Thyristors - ABB DCS 500B Service Manual

Dcs thyristor power converters for dc drive systems 25 to 5200 a
Hide thumbs Also See for DCS 500B:
Table of Contents

Advertisement

Chapter 6 - Exchange of Thyristors for Size A6

BCT thyristors

VI A
6 - 2
In some converter module size A6 so called BCT's (Bidirectional-
Controlled-Thyristors) are used. BCT's are a pair of anti parallel thy-
ristors in one disk type housing. They can easily identified by the
second pair of gate leads. The second gate is marked with Gate B
on the thyristor.
Faston 4.8 x 0.5
Gate A
Figure 6-1
Gates of BCT
Note: The faston connectors of the gates are of different size.
Gate B should always be in front of the clamped heat sinks due to
cooling reasons.
Figure 6-2
Location of BCT's gate B when built in
3ADW000093R0701_DCS500B/DCS600_Service manual_e_g
Gate B
Faston 6.3 x 0.8
Gate B
DCS 500 / DCS 600 Service Manual
Gate A
BCT.dsf

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs 600

Table of Contents