Collecting Diagnostic Log Messages - HP HSR6600 Troubleshooting Manual

<Sysname> dir chassis2#slot0#cfa0:/logfile/
Directory of chassis2#slot0#cfa0:/logfile
1021104 KB total (421552 KB free)
NOTE:
If a subordinate chassis has two MPUs, make sure you identify and export the log files on both MPUs.
3. Transfer the files to the desired destination by using FTP, TFTP, or USB. (Details not shown.)

Collecting diagnostic log messages

1. Save diagnostic log messages from the diagnostic log file buffer to a diagnostic log file.
By default, diagnostic log files are saved in the diagfile directory of the CF card on each MPU.
<Sysname> diagnostic-logfile save
The contents in the diagnostic log file buffer have been saved to the file
cfa0:/diagfile/diagfile18.log
2. Identify the diagnostic log files on each MPU:
# Display the diagnostic log files on the active MPU (in standalone mode) or global active MPU (in
IRF mode).
<Sysname> dir cfa0:/diagfile/
Directory of cfa0:/diagfile
0 -rw-
1021104 KB total (421416 KB free)
# Display the diagnostic log files on each standby MPU:
In standalone mode, display the diagnostic log files on the standby MPU.

<Sysname> dir slot1#cfa0:/diagfile/
Directory of slot1#cfa0:/diagfile
1021104 KB total (421416 KB free)
In IRF mode, display the diagnostic log files on each standby MPU.

<Sysname> dir chassis2#slot0#cfa0:/diagfile/
Directory of chassis2#slot0#cfa0:/diagfile
1021104 KB total (421416 KB free)
NOTE:
If a subordinate chassis has two MPUs, make sure you identify and export the diagnostic log files on
both MPUs.
3. Transfer the files to the desired destination by using FTP, TFTP, or USB. (Details not shown.)
0 -rw- 21863 Jul 11 2013 16:00:37
161321 Jul 11 2013 16:16:00
0 -rw- 161321 Jul 11 2013 16:16:00
0 -rw- 161321 Jul 11 2013 16:16:00
logfile8.log
diagfile18.log
diagfile18.log
diagfile18.log
3