HP HSR6600 Troubleshooting Manual page 27

Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
NVRAM Size
BASIC CPLD Version
EXTEND CPLD Version : 1.0
PCB Version
If the system startup information is not displayed, perform the following task, remove the

memory module, and check the console terminal for the following information:
RAM initialization failed
Fatal error! Please reboot the board.
If the RAM initialization failure alert is displayed, replace the memory module.
If the RAM initialization failure alert is not displayed, there might be CPU problems or
welding problems. Contact HP Support.
If the information like the following appears, the memory self-test failed.

readed value is 75555555 , expected value is 55555555
DRAM test fails at: 5ff80020
Fatal error! Please reboot the board.
Perform the following tasks:
Reboot the device.
−
If the memory controller is not restored to the normal state after an exceptional system
reboot, the memory self-test will fail.
Identify whether the memory module is installed firmly. If the memory module is not installed
−
firmly, reinstall the memory module.
If the memory module is installed firmly, replace the memory module.
−
If the system still displays the memory self-test failure information, the memory channel
−
hardware circuits might have problems. Contact HP Support.
If the following information appears, both the extended BootWare segment and backup

extended BootWare segment have problems. You must manually upgrade the extended
BootWare segment.
System start booting...
Boot ROM program does not exist.
Now start to download program.
======================<BASIC-BOOTWARE MENU(Ver 1.12)>=====================
|<1> Modify Serial Interface Parameter
|<2> Update Extend BootWare
|<3> Update Full BootWare
|<4> Boot Extend BootWare
: Jan 11 2008
: MPC8548E
: 32KB
: 1000MHz
: DDR2 SDRAM
: 4096MB
: 667MHz
: 1024KB
: 4MB
: 128KB
: 1.0
: Ver.B
23
|
|
|
|