Related Commands - HP HSR6600 Troubleshooting Manual

c. View packet statistics on the LPU logic or SPI-4 interface to locate the module that lost packets
and the packet loss cause if the following conditions exist:
−
−
d. Perform the following tasks if the packet error or loss occurs between the interface module
physical layer and FPGA:
−
−
3. If the problem persists, contact HP Support.

Related commands

This section lists the commands that you might use for troubleshooting POS interfaces.
Command
debugging physical packet
display hardware internal module interface-name
interface-number reg 1
display hardware internal module interface-name
interface-number reg 3
display hardware internal module interface-name
interface-number statistics
reset counters interface pos interface-number
The packet statistics is available for the interface module logic.
The packet statistics is unavailable for the vCPU.
Use the display hardware internal module pos interface-number reg 3 command to verify
that the physical layer configuration is correct.
Use the display hardware internal module pos interface-number reg 1 command to verify
that the FPGA configuration is correct.
Description
Enables packet debugging on the device.
Displays FPGA information about POS interfaces.
Displays physical layer information about POS
interfaces.
Displays maintenance information about POS
interfaces.
Clears POS interface statistics.
14