Related Commands - HP HSR6600 Troubleshooting Manual

Execute the display counters rate outbound interface command on the peer end to view the

outbound traffic rate statistics.
The end with a lower rate drops packets.
2. Use the display interface command to view the traffic statistics for the interface to verify that no
packets are dropped by the interface.
3. If the problem persists, collect the following information for the interface:
For interfaces on a FIP-300 or FIP-310 LPU, execute the display hardware internal poe slot

slot-number statistics command in probe view to collect the interface statistics.
For interfaces on a HIM of a FIP-240 LPU, execute the display hardware internal himadp slot

slot-number cnt command in probe view to collect the interface statistics.
Execute the display hardware internal module interface-name interface-number statistics

command in probe view to collect the interface statistics.
Execute the display hardware internal module interface-name interface-number status

command in probe view to collect the status information.
Execute the display hardware internal module interface-name interface-number reg 1

command in probe view to collect the FPGA information.
Execute the display hardware internal module interface-name interface-number reg 2

command in probe view to collect the MAC information.
Execute the display hardware internal module interface-name interface-number reg 3

command in probe view to collect the PHY information.
Execute the display hardware internal ibd pkt-info slot slot-number slot-number command in

probe view to collect inter-card packet statistics.
4. Contact HP Support.

Related commands

This section lists the commands that you might use for troubleshooting ports.
Command
debugging arp packet
debugging ip icmp
debugging ip packet
display arp all
display counters rate inbound interface
display counters rate outbound interface
display hardware internal dpaa slot slot-number
bman pool-info
display hardware internal himadp slot slot-number
cnt
display hardware internal ibd pkt-info slot
slot-number slot-number
display hardware internal module interface-name
interface-number statistics
Description
Enables ARP debugging.
Enables ICMP debugging.
Enables IP debugging.
Displays all ARP entries.
Displays inbound traffic rate statistics.
Displays outbound traffic rate statistics.
Displays hardware buffer information for interfaces on
a FIP-240 or FIP-600 LPU.
Displays statistics for interfaces on a HIM of a FIP-240
LPU.
Displays inter-card packet statistics.
Displays Ethernet interface statistics.
33