Shooting - Letting The Camera Select Settings; Auto Mode - Canon POWERSHOT PRO1 User Manual

Shooting – Letting the Camera Select
Settings
See Functions Available in Each Shooting Mode (p. 206) at the
end of this manual to find out which settings can be changed
in which shooting modes.

Auto Mode

In this mode, all you have to do is press the shutter button and let
the camera do everything else.
1
Check that the camera is in Shooting mode (p. 29).
2
3
Aim the camera at the subject.
4
Use the zoom ring to achieve the desired
composition (relative subject size on the LCD
monitor (or in the viewfinder)).
5
Press the shutter button halfway
(p. 41).
The camera focuses on the subject. Two
beeps will sound when the camera has
finished metering.
The AF frame will appear green on the
LCD monitor (or in the viewfinder).
The shutter speed and aperture value are
automatically determined and show on
the display panel and the LCD monitor (or
in the viewfinder).
The beep will sound one time and the AF
frame will appear yellow if the subject is
difficult to focus on.
Downloaded From camera-usermanual.com Canon Manuals
Turn the mode dial to .
AF Frame
53