Self-Timer - Canon POWERSHOT PRO1 User Manual

Self-Timer

You can take pictures with the self-timer in any shooting mode.
1
Press the
Press the
on the display panel and
appears on the LCD monitor (or in the
viewfinder).
You can cancel the self-timer by pressing
the
2
Shoot the image.
When the self-timer is set to 10 seconds, the self-timer sounds and
the self-timer lamp starts blinking when the shutter button is
pressed all the way. The blinking gets faster two seconds before
the shutter activates.
When the self-timer is set to 2 seconds, the self-timer lamp blinks
fast from the beginning. The shutter activates in two seconds.
Shooting procedures are the same as for the
You can change the self-timer sound by changing the setting in
[Selftimer Sound] in the [
Setting the Number of Seconds until Shooting
You can set the number of seconds from the time the shutter button
is pressed to the time the image is shot to 10 seconds or 2 seconds.
1
Select [Self-timer] from the [
(Rec.)] menu.
See Selecting Menus and Settings
(p. 44).
2
Select [
seconds) and press the MENU
button.
Downloaded From camera-usermanual.com Canon Manuals
button.
button until
button again.
] (10 seconds) or [
appears
or
(My Camera)] menu (p. 51).
] (2
mode (p. 53).
77