Checking The Information On The Lcd Monitor/Viewfinder - Canon POWERSHOT PRO1 User Manual

Checking the information on the LCD
Monitor/Viewfinder
Each time you press the INFO. button the LCD monitor (or the
viewfinder) cycles to the next information mode.
Both the LCD monitor and the viewfinder have a field of vision of
100% of the actual shooting image.
Shooting Mode
Each time you press the INFO. button the information view switches
as follows.
No Information
* Depending on the LCD monitor's position, the information view may not
display.
You can check detailed information about the image you just
shot without switching the camera to Playback mode. To do so,
while the image is being reviewed right after being taken, press
the SET button, then INFO. button.
The last selected Information View mode appears the next time
you power on the camera.
Playback Mode
Each time you press the INFO. button the information view mode
cycles as follows.
Single Image Playback (p. 122):
Standard Information View
Index Playback (p. 124):
Standard Information View
34
Downloaded From camera-usermanual.com Canon Manuals
Information View
Detailed Information View
No Information
∗
No Information