Switching Between Shooting And Playback - Canon POWERSHOT PRO1 User Manual

Turning on the camera without the start-up sound and
image
Press and hold the
turn the camera on with the LCD monitor closed.
Power Saving Function
This camera is equipped with a power saving function. When this
function is turned on and it activates, restore power by turning the
mode lever toward
Shooting Mode: Powers down approximately 3 minutes after the
last control is accessed on the camera.
The LCD monitor (or viewfinder) also shuts off approximately 1
*
minute after the last control is accessed on the camera. Press any
button except the mode lever to turn the LCD monitor (or viewfinder)
back on.
* This time can be changed (p. 50).
Playback Mode: Powers down approximately 5 minutes after the
last control is accessed on the camera.
Printer Connection Mode: Powers down approximately 5 minutes
after the last control is accessed on the camera or connected printer.
The power saving function is disabled while a slide show plays on
the camera or during a computer connection (p. 133, 149).
You can turn off the power saving function in the Set up menu
(p. 50).

Switching between Shooting and Playback

You can quickly switch between Shooting mode and Playback
mode. This is convenient when you wish to shoot again after
checking or erasing an image immediately after it is shot.
Shooting Mode
Turn the mode lever to
button (p. 30).
The camera switches to Playback mode. In this case, the lens
does not retract. (If the mode lever is turned to
again, the lens retracts.)
Playback Mode
Remove the lens cap and press the shutter button halfway, or turn
the mode lever to
(p. 29).
Downloaded From camera-usermanual.com Canon Manuals
button, then turn on the power. You can also
or .
Playback Mode
(Playback) while pressing the release
Shooting Mode
(Shooting) while pressing the release button
(Playback)
31