Using The Nd Filter - Canon POWERSHOT PRO1 User Manual

Using the ND Filter

Mode Dial
The brightness can be decreased by setting the ND filter on. This
allows you to select a smaller aperture value and a slower shutter
speed than usual.
1
Select [ND Filter] in the [
See Selecting Menus and Settings (p. 44).
2
Select [On] and press the MENU button.
ND appears on the display panel and the LCD monitor (or in the
viewfinder).
Always use a tripod to prevent camera shake in this mode.
Standard brightness is decreased to approximately 1/8 when the
ND filter is on. For example, if the appropriate aperture value is
8, it becomes 2.8 when the ND filter is on.
118
Downloaded From camera-usermanual.com Canon Manuals
(Rec.)] menu.