Canon POWERSHOT PRO1 User Manual page 147

When the print type (p. 144) is set to
[Index], select an image using the main
dial or the
selector and mark or remove marks from
images using the
omni selector. A check mark appears on
the marked image.
You can use the same procedures to
select images in index playback (3
images). Press the
between single image playback and
index playback.
All the Images on a CF Card
Press the
playback (3 images).
You can set one copy of each image to
print by pressing the SET button, then
selecting [Mark all] using the
arrow on the omni selector, and pressing
the SET button again.
When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print
settings can be deleted. For the
instructions on changing settings, please
reread Step 3 from the beginning.
You can cancel all the settings by
selecting [Clear all].
4
Press the MENU button.
The selection mode will turn off and the Print Order menu will
reappear.
Images are printed in order from oldest to newest by the shooting
date.
A maximum of 998 images can be marked per CF card.
When [Print Type] is set to [Both], the number of copies can be
set. When it is set to [Index], the number of copies cannot be set
(only one copy will be printed).
Print settings can also be assigned to images with the supplied
software programs on a computer.
Downloaded From camera-usermanual.com Canon Manuals
or arrow on the omni
or arrow on the
button to switch
button to switch to index
or
143