Canon POWERSHOT PRO1 User Manual page 152

Selecting Images for Transferring (continued)
3
Select images for transferring.
Single Images
Select an image using the main dial or
the
and mark or remove marks from images
using the
selector. A check mark appears on the
marked image.
You can use the same procedures to
select images in index playback (3
images). Press the
between single image playback and
index playback.
All the Images on a CF Card
Press the
playback (3 images).
Then press the SET button, and select
[Mark all] using the
omni selector and press the SET button
again. (If you select [Clear all] instead of
[Mark all], you can remove marks from all
the images.)
You can select images using the main
dial or the
selector and change the settings using
the
after [Mark all] or [Clear all] has been
selected.
4
Press the MENU button.
The selection mode will turn off and the Transfer Order menu will
reappear.
Images are transferred in order from oldest to newest by the
shooting date.
A maximum of 998 images can be marked per CF card.
148
Downloaded From camera-usermanual.com Canon Manuals
or arrow on the omni selector
or arrow on the omni
button to switch to index
or
or arrow on the omni
or arrow on the omni selector
button to switch
arrow on the