Viewing Images On A Tv Set - Canon POWERSHOT PRO1 User Manual

Viewing Images on a TV Set

A video-compatible television connected via the supplied AV cable
AVC-DC300 can be used to view images as you shoot or replay them.
1
Turn off the camera (p. 30).
Also turn the television off.
2
3
Yellow
Plug
Black
Plug
4
Turn on the TV and switch it to Video mode.
5
Turn the mode lever to
The image will appear on the TV. Shoot or play back images as
usual.
No image will appear on the LCD monitor (or in the viewfinder)
when the camera is connected to a TV monitor.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 50). The default
setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not
display properly.
If the TV is a stereo model, you can plug the audio plug into
either the left or right Audio In jack. Please refer to the TV's
manual for details.
A TV set cannot be used in
Downloaded From camera-usermanual.com Canon Manuals
Attach AV Cable AVC-DC300 to
the A/V OUT terminal on the
camera.
Plug the other ends of the AV
To the Video
cable to the video in and audio in
In Jack
jacks on the TV.
To the Audio
In Jack
or (p. 29, 30).
mode.
153