Table of Contents
Advertisement
The page includes the following fields:
Object
Disable Wireless LAN
Interface
Band
Mode
Channel Width
Control Sideband
Channel Number
Data Rate
AP+ WDS
Connect this Wireless AP with up to 8 WDS-capable wireless APs, and connect another AP to provide
service for all wireless stations within its coverage.
User Manual of WDAP-C7200AC/WDAP-W7200AC
Check the box to disable the wireless function.
Select the desired mode. Default is "2.4GHz (B+G+N)". It is strongly
recommended that you set the Band to "2.4GHz (B+G+N)", and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the
WDAP-C7200AC/WDAP-W7200AC.
2.4 GHz (B): 802.11b mode, rate is up to 11Mbps
2.4 GHz (G): 802.11g mode, rate is up to 54Mbps
2.4 GHz (N): 802.11n mode, rate is up to 300Mbps(2T2R)
2.4 GHz (B+G): 802.11b/g mode, rate is up to 11Mbps or 54Mbps
2.4 GHz (G+N): 802.11g/n mode, rate is up to 54Mbps or 300Mbps
2.4 GHz (B+G+N): 802.11b/g/n mode, rate is up to 11Mbps,
54Mbps, or 300Mbps
There are four kinds of wireless mode selections:
AP
Client
WDS
AP+WDS
If you select WDS or AP+WDS, please click "WDS Settings" in the
submenu for the related configuration. Furthermore, click "Multiple
AP" to enable multiple SSID function.
You can select 20MHz, or 40MHz
You can select Upper or Lower.
You can select the operating frequency of wireless network.
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically, it's not necessary to change this value
unless you know what will happen after modification.
Default is "Auto".
-79-
Description
Advertisement
Table of Contents
