Table of Contents
Advertisement
The page includes the following fields:
Object
Disable Wireless LAN
Interface
Band
Mode
Network Type
SSID
Broadcast SSID
User Manual of WDAP-C7200AC/WDAP-W7200AC
Check the box to disable the wireless function.
Select the desired mode. Default is "2.4GHz (B+G+N)". It is strongly
recommended that you set the Band to "2.4GHz (B+G+N)", and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the
WDAP-C7200AC/WDAP-W7200AC.
2.4 GHz (B): 802.11b mode, rate is up to 11Mbps
2.4 GHz (G): 802.11g mode, rate is up to 54Mbps
2.4 GHz (N): 802.11n mode, rate is up to 300Mbps(2T2R)
2.4 GHz (B+G): 802.11b/g mode, rate is up to 11Mbps or 54Mbps
2.4 GHz (G+N): 802.11g/n mode, rate is up to 54Mbps or 300Mbps
2.4 GHz (B+G+N): 802.11b/g/n mode, rate is up to 11Mbps,
54Mbps, or 300Mbps
There are four kinds of wireless mode selections:
AP
Client
WDS
AP+WDS
If you select WDS or AP+WDS, please click "WDS Settings" in the
submenu for the related configuration. Furthermore, click "Multiple
AP" to enable multiple SSID functions.
In Infrastructure, the wireless LAN serves as a wireless station. And
the
user
can
use
WDAP-C7200AC/WDAP-W7200AC to access the wireless network via
other access points. In ad hoc, the wireless LAN will use the ad-hoc
mode to operate.
Default is "Infrastructure".
Note: only while the wireless mode is set to "Client", then the Network
Type can be configured.
It's the ID of the wireless network. User can access the wireless
network via the ID only. However, if you switch to Client Mode, this
field becomes the SSID of the AP you want to connect with.
Default: Planet AP 2.4G
If you enable "Broadcast SSID", every wireless station located within
the coverage of the WDAP-C7200AC/WDAP-W7200AC can discover
its signal easily. If you are building a public wireless network, enabling
this feature is recommended. In private network, disabling "Broadcast
-74-
Description
the
PC
equipped
with
the
Advertisement
Table of Contents
