Table of Contents
Advertisement
The page includes the following fields:
Object
Enable WDS
MAC Address
Data Rate
Comment
Set Security
Show Statics
Current WDS AP List
WDS feature can only be implemented between 2 wireless devices that both support the
WDS feature. Plus, channel, security settings and security key must be the same on
both such devices.
To encrypt your wireless network, click "Set Security". For the detail of wireless security,
see
security settings; otherwise, the WDS feature may not function.
Figure 5-72 WDS – Set Security
Check the box to enable the WDS function. Please select WDS or
AP+WDS in the Mode of Wireless Basic Settings before you enable
WDS on this page.
You can enter the MAC address of the AP you want to connect with.
Default is "Auto".
You can make some comment for each MAC address on the list.
Click "Set Security" to configure the wireless security parameters of the
AP you want to connect via WDS.
Click "Show Statics" to show the WDS AP.
You can select some MAC addresses of the AP and click "Delete
Selected" to delete it.
section
5.5.4. Do remember to reboot the device after you save your wireless
User Manual of WDAP-C7200AC/WDAP-W7200AC
Description
-91-
Advertisement
Table of Contents
