BEC 6300VNL Quick Start Manual
Hide thumbs
Also See for 6300VNL:
- User manual (133 pages) ,
- Quick start manual (13 pages) ,
- User manual (123 pages)
Subscribe to Our Youtube Channel
Related Manuals for BEC 6300VNL
Summary of Contents for BEC 6300VNL
-
Page 1: Quick Start Guide
BEC 6300VNL GigaConnect ® Wireless Broadband Router Quick Start Guide Version 8.25.16... -
Page 2: Package Contents
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM. -
Page 3: Front Panel Leds
No signal and the 3G/EVDO module is in service No 3G/EVDO module or 3G/EVDO module fails Green IP connected and traffic is passing through the device. Internet IP request failed. BEC 6300VNL is either in bridged mode or WAN connection not ready. -
Page 4: Rear Panel Connectors
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router Rear Panel Connectors PORT MEANING LTE Antenna Screw the supplied LTE antennas onto the antenna connectors on both sides. Insert the mini SIM card (2FF) with the gold contact facing down. SIM Card Slot... -
Page 5: Hardware Connection
Power Supply) 1.1 Using the Supplied AC/DC Power Adaptor Plug in the supplied power adapter to the wall jack, the other side to the 6300VNL then power it ON the by pressing the Power On/Off button. 1.2 Using a UPS Battery Unit (Optional) Power OFF the power source button and plug the uninterruptible power supply (UPS) to the device;... - Page 6 PC’s Ethernet interface. 3. WAN Link Interface and Connection BEC 6300VNL supports failover and fallback on multiple WAN interfaces, 4G LTE, EWAN and USB 3G/4G LTE. Please refer to User Manual for detailed Internet setup. 3.1 3G/EVDO Connection Slide the SIM card into the card slot of the device with the gold contact facing down.
-
Page 7: Connecting To The Router
Quick Start Guide 4. USB for Network File Sharing (Optional) BEC 6300VNL has built-in FTP and Samba Servers, Simply plug in an external USB HD then follow the instruction setup in the User Guide. Connecting to the Router The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1... - Page 8 BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router Enable and select your Time Zone then click Continue to go on to the next step. Time Zone: select your time zone Next Step: click Next Step 3: Setup Wireless Connection Access Point: select...
-
Page 9: Troubleshooting
Quick Start Guide Troubleshooting 1. None of the LEDs are on when you turn on the router. Check the connection between the adapter and the router. If the error persists, you may have a hardware problem. In this case you should contact technical support. 2.
Need help?
Do you have a question about the 6300VNL and is the answer not in the manual?
Questions and answers