Outback CD200 Assembly And Operating Instructions Manual page 9

9
Attach the Rear Bracket (C13) to the rear support legs using the M6x35 Bolts (D2x2pcs) and
M6 Nuts (D3x2pcs) as shown.
10
C15
Attach one Silicone Pad (C15) onto the Bend Bracket (C14) using the ST4.0x10 Screw
(D6) and M4 Spacer (D7) as shown. Repeat above process for other silicone pad. Then
place the support assembly onto the bend bracket hook.
C13
C14
9
D3
D6
D7
C15
C14
D2