Replacing The Platen Roller - SATO CL4NX Operator's Manual

7 Appendix

7.4 Replacing the Platen Roller

You can easily remove and replace a damaged or worn platen roller.
WARNING
• Do not touch the power button, connect or disconnect the power cord while your hands are wet. Doing so
could cause an electric shock.
• Disconnect the power cord from the AC outlet before you replace the platen roller.
1
Make sure that the printer is in power off
mode, then disconnect the power cord
from the AC outlet.
2
Open the top cover.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3
Push the head lock lever  towards the
rear to unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
4
Lift the lever  to unlock the platen
roller , then pull out the platen roller
.
266
CL4NX/CL6NX Operator Manual
1
2
1
2
3