BJC-8200
1.4 Function Settings
Since this printer has no function selector for setting functions, the dedicated printer
driver is used for setting functions.
1.4.1 Function settings using the printer driver
From the Maintenance menu of the dedicated printer driver, you can set/execute the
following items.
1) Cleaning
2) Head refreshing (long cleaning)
3) Clean the pick-up roller
4) Print the nozzle-check pattern
5) Adjust the head position.
6) Power off the printer
7) Launch the status monitor
8) Special settings
• Enable ECP mode (disabled by default)
• Enable high speed printing (enabled by default): printer's response time (ACKNLG)
is changed from 4 to 0.9 ms.
Figure 3-3 Printer Driver Utility (Sample)
3-5
Part 3: OPERATION