Replacing The Cartridge/Ink Tank - Canon BJC-820 Service Manual

Hide thumbs Also See for BJC-820:

Table of Contents

BJC-8200

1.5.3 Replacing the cartridge/ink tank

When you open the cover of the printer with powered on, the carriage moves to the

cartridge replacement position (at the center of the printer). After replacing the BJ

cartridge or ink tank, when you close the cover or leave it open for 10 minutes, then

the carriage returns to the home position, at the right-most position, and starts

cleaning operations. (The beeper will sound before cleaning starts.)

1) Replacing the BJ cartridge/scanner cartridge

Raise the cartridge lock lever, remove the BJ cartridge or scanner cartridge. When

you install the scanner cartridge, keep the BJ cartridge, when removed from the

printer, in the BJ cartridge container (supplied with the scanner cartridge).

2) Replacing the ink tank

You can replace the ink tanks without having to raise the cartridge lock lever. Since

there are 6 separate ink tanks, one for each color, you can separately replace the ink

tank that has become empty.

CAUTION

Printed with No. 1 nozzle for black

(The same for each color)

The BJ cartridge may be very hot immediately after continuous operation.

If you open the printer cover when the cartridge is still hot, the carriage

will not move to the replacement position until it has cooled, for safety

purposes. In this case, leave the printer for several minutes and then

reattempt replacement.

Placement of even-numbered and odd-numbered nozzles

(The same for each color)

Figure 3-4 Nozzle Check Pattern Print

Printed with No. 256 nozzle for black

(The same for each color)

Placement setting for bi-directional print

3-7

Part 3: OPERATION

Table of Contents