Power Button Board - HP ProBook 4325s Maintenance And Service Manual

Power button board

Description
Power button board with cable (included with switch cover, see
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Switch cover (see
Remove the power button board:
1. Disconnect the power button board cable (1).
2. Gently pull the power button board away from the double-sided tape that secures the board to
the base enclosure.
3. Remove the power button board (2).
Reverse this procedure to install the power button board.
Battery on page
Switch cover on page 47)
Switch cover on page
45).
Component replacement procedures
47)
55