HP ProBook 4325s Maintenance And Service Manual page 62

Hide thumbs Also See for ProBook 4325s:
Table of Contents

Advertisement

4.
Remove the optical drive (2) from the computer.
5.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear
toward you.
6.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
7.
Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install an optical drive.
54
Chapter 4 Removal and replacement procedures

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 4425sProbook 4326s

Table of Contents