HP ProBook 4325s Maintenance And Service Manual page 67
Hide thumbs
Also See for ProBook 4325s:
- User manual (196 pages) ,
- Frequently asked questions manual (25 pages) ,
- Getting started (19 pages)
Table of Contents
Advertisement
2.
Remove the three Phillips PM2.5×3.0 broadhead screws that secure the palm rest to the
computer.
3.
Slide the palm rest to the right.
4.
Turn it over from the front edge until it rests upside down on the top cover.
5.
Release the fingerprint reader connector (1) and the TouchPad cable connector (1).
6.
Remove the fingerprint reader cable (2) and the TouchPad cable (2) from the system board.
Component replacement procedures
59
Advertisement
Table of Contents
